Ghost 2 Immobiliser Installation
The installation of the ghost 2 immobiliser is a simple and effective way to secure your vehicle from theft. It is directly connected to the CAN network of your vehicle and is virtually unnoticeable.
Locate a source of constant power and a point for grounding. It is vital to have these wires correctly protected from electrical shorts.
Stops theft
The Ghost 2 Immobiliser creates an individual PIN code by using the electronic buttons on your steering wheel or the center console. This ensures that only you will be authorized to start your car. This means that even if thieves are able to steal your keys or hack into your car's systems, they won't be able to get the vehicle to move. It's also silent and undetectable by anyone who attempts to test it, so you can rest sure that no one will notice that you've added a new layer to security.
Another reason that it is so effective in preventing theft is the ability to stop your engine even if a thief has managed to gain entry. This is accomplished through the use of an additional device, called the Shadow, which connects to your car's CAN data network and doesn't communicate via radio frequency, making it difficult for thieves to locate or alter. The Shadow can also be linked to your vehicle's tracking/paging system, which allows you to track its movements. It has an output that can be used to trigger a siren when someone tries to steal it.
It is vital to work in a well-lit area when working with wiring, to aid in identifying the correct wires and avoid any short circuits or accidental disconnections. Checking the connections twice and testing them is important and also insulation of the wiring to shield it from the elements. Cable tie can be used to secure wires and bundle them. This can improve their appearance and decrease the possibility of them being dislodged when the vehicle is operating.
It is also a great idea to mark the CAN L and H wires using labels or tape. An incorrect identification of their position could trigger a surge of power that damages the immobiliser. Multimeters can be used to check that the power source and grounding points are providing the same 12V level and a secure connection.
Simple to use
Ghost immobilisers are an excellent method to protect your vehicle from theft. It protects against key cloning ECU swapping and other security risks, and can be linked with an iPhone app for easy monitoring and management. The app can also send notifications if your car has been altered. The app can also assist you to locate your vehicle in the event that it is stolen.
The Ghost immobiliser is discrete and does not require any special equipment in order to function. It is connected to the CAN system of your vehicle and is programmed using a unique PIN. It can be activated with a set of buttons on your dashboard or the steering wheel, or via the WeCar mobile application. The code has to be entered to turn on the engine, so that thieves cannot just turn on your vehicle and leave.
Installing a Ghost immobiliser is an easy process. However, it's crucial to follow the steps to ensure that your vehicle's systems are working smoothly. The first step is disconnection of the battery. This will prevent accidental airbag deployment and ensure safety. It is also essential to work in a well-lit space to make precise connections and avoid mistakes. It is also essential to employ the correct soldering techniques and high-quality connectors to ensure a solid and solid connection.
The CAN H and L wires are required to connect the Ghost immobiliser to the wiring of your vehicle. Use a wiring diagram to identify these wires. Then, locate the best place to connect them. It's also helpful to label these wires with tape or labels so you can easily identify them when you install.
It's a great idea to test your immobiliser once the connections have been made to ensure that it functions correctly. It is also advisable to test the Transport Mode which disables the Ghost System and allows you temporarily to switch off your security features. This is particularly helpful for scenarios like servicing or transportation of vehicles. This feature is particularly beneficial if you have an older vehicle that requires its battery to be isolated for servicing.
Low-profile
A ghost immobiliser can be used to stop theft from vehicles with keyless entry. It works by intercepting your vehicle's remote control signal and forming a barrier that thieves can't breach it without the correct PIN code. It's a secure and discreet way to protect your car, and it's even recommended by insurance companies to reduce monthly premiums. It is a low-profile, concealed system that can be found within your car's buttons. It does not have LED indicators, which makes it virtually unnoticeable to thieves.
The Ghost immobiliser, unlike most other security systems is connected to the CAN data network of your vehicle instead of remote control. This means that thieves won't be able to identify or disable the device via cutting wires and is secure against tampering. This makes it harder to steal your vehicle and it's an excellent choice for older vehicles that are not equipped with a keyless entry system.
The installation of a ghost immobiliser can be completed by a professional or you can do it yourself with the right tools and materials. You'll need a few basic hand tools, a multimeter to check electrical values, and insulation tape or cable ties to ensure that your connections are secure well-insulated. Before you start your engine, you must disconnect your battery and make sure that all wiring is securely connected. This will prevent thieves from tampering with the wiring.
If you're not confident in doing your own immobiliser installation then you can ask a local auto shop to do it for you. They'll take care of everything from the initial inspection to installing the device and provide a warranty if anything goes wrong. They'll be able to answer any questions you have about the immobiliser and help you decide if it's the right choice for you vehicle.
The Autowatch Ghost 2 smart immobiliser integrates directly into your car's electronic control unit. This protects against key cloning and hacking attacks that are typical in modern automobiles. It is TASSA-verified and offers the highest level of theft protection, which means you can drive with confidence.
TASSA verified
The Ghost immobiliser system is one of the most effective methods to safeguard your car from theft. It connects to the CAN data network of your vehicle and prevents your engine from running without your PIN number. The system isn't able to be detected by thieves and is an excellent alternative to car alarms. You can alter the PIN code at any time, and only you will be aware of the change, ensuring the security of your vehicle.
A TASSA certified installer will complete the installation of Ghost Ghost system within a few hours at your home or place of work. cost of ghost immobiliser will also receive a complimentary emergency card, installation certificate as well as owner's guides. They will also provide you with a an extensive demonstration of the device, and ensure that you are satisfied with the service before they leave.
The Ghost unlike other immobilisers is able connect directly to the CAN data network of your vehicle. It can be installed without needing to cut any wires. It's also quiet, making it difficult to be detected by thieves. The system is programmed with a an individual PIN code that you can change, which you enter by using the buttons on your dashboard and the steering wheel. This blocks anyone else from starting your car even if they own your key fobs.
Connect the battery prior to installing the ghost 2 immobiliser. This will stop accidental deployment of airbags or short circuits. After the battery has been disconnected, it's important to follow the instructions in the user manual to connect the immobiliser. Check online resources for additional information specific to your model.
You should check the immobiliser after you have completed it to make sure it's working correctly. You can accomplish this by entering the PIN code and trying to start the vehicle. After doing this it is recommended to conduct regular checks to ensure that the immobiliser is functioning correctly. This will help you identify any problems early so that you can address them quickly.